
View/ Open
Accepted manuscript (2.275Mb)
Download
Publication date
2022-12Rights
© 2022 Institution of Structural Engineers. Published by Elsevier Ltd. All rights reserved.© 2022 Elsevier. Reproduced in accordance with the publisher's self-archiving policy. This manuscript version is made available under the CC-BY-NC-ND 4.0 license.Peer-Reviewed
YesOpen Access status
openAccessAccepted for publication
2022-10-21
Metadata
Show full item recordAbstract
This paper presents an experimental investigation of demountable reinforced concrete slabs using dry connections between reinforced concrete slab elements. The test specimens comprised six full-scale reinforced concrete slabs; one control slab monolithically cast, while the other five slabs were produced with mid-span demountable dry connections. The slab elements were cast separately and assembled using top and bottom steel plates joined to each side of the slab element by high tensile steel bolts with or without a shear key and embedded steel block. Theoretical analysis of the behaviour of the demountable slabs tested in comparison with the control specimen was also conducted. The test results showed that using a dry connection consisting of a shear key at the assembled section is the most effective technique in terms of moment resistance, deflection, and flexural stiffness. On the other hand, the dry connection with embedded steel blocks failed prematurely because of stress concentration at the block edges. The moment capacity and deflection predictions of demountable slabs have reasonably correlated with the experimental results but required additional calibrated data from experiments.Version
Accepted manuscriptCitation
Almahmood HAA, Ashour AF, Figueira D et al (2022) Tests of demountable reinforced concrete slabs. Structures. 46: 1084-1104.Link to Version of Record
https://doi.org/10.1016/j.istruc.2022.10.097Type
Articleae974a485f413a2113503eed53cd6c53
https://doi.org/10.1016/j.istruc.2022.10.097