Show simple item record

dc.contributor.authorVilla, C.
dc.contributor.authorGaudio, D.
dc.contributor.authorCattaneo, C.
dc.contributor.authorBuckberry, Jo
dc.contributor.authorWilson, Andrew S.
dc.contributor.authorLynnerup, N.
dc.date.accessioned2015-11-06T15:23:30Z
dc.date.available2015-11-06T15:23:30Z
dc.date.issued2015-03
dc.identifier.citationVilla C, Gaudio D, Cattaneo C, Buckberry J,Wilson AS and Lynnerup N (2015) Surface curvature of pelvic joints from three laser scanners: separating anatomy from measurement error. Journal of Forensic Sciences, 60 (2): 374–381.en_US
dc.identifier.urihttp://hdl.handle.net/10454/7472
dc.descriptionyesen_US
dc.description.abstractRecent studies have reported that quantifying symphyseal and auricular surfaces curvature changes on 3D models acquired by laser scanners have a potential for age estimation. However, no tests have been carried out to evaluate the repeatability of the results between different laser scanners. 3D models of the two pelvic joints were generated using three laser scanners (Custom, Faro, Minolta). The surface curvature, the surface area and the distance between co-registered meshes were investigated. Close results were found for surface areas (differences between 0.3% and 2.4%) and for distance deviations (average < 20 μm, SD < 200 μm). The curvature values were found to be systematically biased between different laser scanners, but still showing similar trends with increasing phases / scores. Applying a smoothing factor to the 3D models, it was possible to separate anatomy from the measurement error of each instrument, so that similar curvature values could be obtained (p < 0.05) independent of the specific laser scanner.en_US
dc.language.isoenen_US
dc.relation.isreferencedbyhttp://dx.doi.org/10.1111/1556-4029.12696en_US
dc.rights© 2015 Wiley. Reproduced in accordance with the publisher's self-archiving policy.This is the peer reviewed version of the following article above, which has been published in final form at http://dx.doi.org/10.1111/1556-4029.12696. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archivingen_US
dc.subjectForensic science, Forensic anthropology, Pubic symphysis, Auricular surface, Curvature, Laser scanner, Surface area, Distance deviation, 3D modelsen_US
dc.titleSurface curvature of pelvic joints from three laser scanners: separating anatomy from measurement error.en_US
dc.status.refereedyesen_US
dc.date.Accepted2014-04-16
dc.typeArticleen_US
dc.type.versionAccepted Manuscripten_US
dc.description.publicnotesThe full text was made available at the end of the publisher's embargo: 31st March 2016en_US
refterms.dateFOA2018-07-25T12:08:58Z


Item file(s)

Thumbnail
Name:
Manuscript R1.pdf
Size:
629.3Kb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record