Show simple item record

dc.contributor.authorQureshi, J.*
dc.contributor.authorLam, Dennis*
dc.date.accessioned2013-06-05T10:30:59Z
dc.date.available2013-06-05T10:30:59Z
dc.date.issued2009
dc.identifier.citationQureshi, J. and Lam, D. (2009). Behaviour of Headed Shear Stud in Composite Beams with Profiled Metal Decking. In: Proceedings of the Third International Symposium on Advances in Steel and Composite Structures by K.F. Chung (Ed.). Third International Symposium on Advances in Steel and Composite Structures, 3 August, 2009, Hong Kong, China.en_US
dc.identifier.urihttp://hdl.handle.net/10454/5585
dc.descriptionNoen_US
dc.description.abstractThis paper presents a numerical investigation into the behaviour of headed shear stud in composite beams with profiled metal decking. A three-dimensional finite element model was developed using general purpose finite element program ABAQUS to study the behaviour of through-deck welded shear stud in the composite slabs with trapezoidal deck ribs oriented perpendicular to the beam. Both static and dynamic procedures were investigated using Drucker Prager model and Concrete Damaged Plasticity model respectively. In the dynamic procedure using ABAQUS/Explicit, the push test specimens were loaded slowly to eliminate significant inertia effects to obtain a static solution. The capacity of shear connector, load-slip behaviour and failure modes were predicted and validated against experimental results. The delamination of the profiled decking from concrete slab was captured in the numerical analysis which was observed in the experiments. ABAQUS/Explicit was found to be particularly suitable for modelling post-failure behaviour and the contact interaction between profiled decking and concrete slabs. It is concluded that this model represents the true behaviour of the headed shear stud in composite beams with profiled decking in terms of the shear connection capacity, load-slip behaviour and failure modes.en_US
dc.language.isoenen_US
dc.subjectHeaded Shear Studsen_US
dc.subjectComposite Beamsen_US
dc.subjectProfiled Metal Deckingen_US
dc.titleBehaviour of Headed Shear Stud in Composite Beams with Profiled Metal Deckingen_US
dc.status.refereedYesen_US
dc.typeConference paperen_US
dc.type.versionNo full-text available in the repositoryen_US


This item appears in the following Collection(s)

Show simple item record