Vibro-acoustic products from re-cycled raw materials using a cold extrusion process. A continuous cold extrusion process has been developed to tailor a porous structure from polymeric waste, so that the final material possesses particular vibro-acoustic properties.
| dc.contributor.advisor | Horoshenkov, Kirill V. | |
| dc.contributor.advisor | Benkreira, Hadj | |
| dc.contributor.author | Khan, Amir | * |
| dc.date.accessioned | 2010-05-07T11:32:02Z | |
| dc.date.available | 2010-05-07T11:32:02Z | |
| dc.date.issued | 2010-05-07T11:32:02Z | |
| dc.identifier.uri | http://hdl.handle.net/10454/4289 | |
| dc.description.abstract | A cold extrusion process has been developed to tailor a porous structure from polymeric waste. The use of an extruder to manufacture acoustic materials from recycled waste is a novel idea and the author is not aware of any similar attempts. The extruder conveys and mixes the particulates with a reacting binder. The end result is the continuous production of bound particulates through which a controlled amount of carbon dioxide gas that is evolved during the reaction is used to give the desired acoustic properties. The cold extrusion process is a low energy consuming process that reprocesses the post manufacturing waste into new vibro-acoustic products that can be used to meet the growing public expectations for a quieter environment. The acoustical properties of the developed products are modelled using Pade approximation and Johnson-Champoux-Allard models. Applications for the developed products are widespread and include acoustic underlay, insulation and panels in buildings, noise barriers for motorways and railway tracks, acoustic insulation in commercial appliances and transport vehicles. | en |
| dc.language.iso | en | en |
| dc.rights | <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-nd/3.0/88x31.png" /></a><br />The University of Bradford theses are licenced under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/">Creative Commons Licence</a>. | en |
| dc.subject | Re-cycling polymeric waste | en |
| dc.subject | Cold extrusion | en |
| dc.subject | Vibro-Acoustic materials | en |
| dc.subject | Thermal insulation materials | en |
| dc.subject | Acoustic insulation materials | en |
| dc.subject | Porous polymeric materials | en |
| dc.title | Vibro-acoustic products from re-cycled raw materials using a cold extrusion process. A continuous cold extrusion process has been developed to tailor a porous structure from polymeric waste, so that the final material possesses particular vibro-acoustic properties. | en |
| dc.type.qualificationlevel | doctoral | en |
| dc.publisher.institution | University of Bradford | eng |
| dc.publisher.department | School of Engineering, Design and Technology. | en |
| dc.type | Thesis | eng |
| dc.type.qualificationname | PhD | en |
| dc.date.awarded | 2008 | |
| refterms.dateFOA | 2018-07-18T23:34:15Z |
Item file(s)
This item appears in the following Collection(s)
Related items
Showing items related by title, author, creator and subject.
-
Rheological characterisation of hydroxapatite filled polyethylene composites. Part II - Isothermal compressibility and wall slipRheological characterisation of hydroxyapatite -high density polyethylene (HA-HDPE) composites has been performed in terms of isothermal compressibility and wall slip. Addition of HA to the polymer melt decreases the compressibility of the melt. The unfilled HDPE was found to exhibit wall slip at shear stresses as low as 0.10 MPa. The flow curves of the composites showed three distinct regions: a gradient at low shear rates; a plateau region; and a gradient at higher shear rate. An increase in rheometer pressure seems to suppress the slip in composites. The 40 vol.-% HA-HDPE composite exhibited two critical shear stresses, one corresponding to wall slip, which occurs in the lower shear rate region of the flow curve, and the other corresponding to a plateau, which is identified with the stick-slip behaviour of unfilled HDPE reported in the literature. The plateau shear stress increased with filler volume fraction and this effect is attributed to the decreased compressibility of the melt. A good correlation with a negative correlation coefficient was found to exist between compressibility and shear stress in the plateau region. The slip observed in unfilled HDPE and at low shear rates in the 40 vol.-% HA- HDPE systems has been explained in terms of a low molecular weight polymer layer formed at the melt/wall interface. The large interfacial slip observed in the plateau region is attributed to complete disentanglement of adsorbed chains from free chains at the melt/wall interface at and beyond the plateau region.
-
Time will tell: Material surface cues for the visual perception of material ageing Insights from psychophysics, online experiments, image processing and a science festivalThis thesis explores the visual perception of material change over time, a novel topic that has received little attention so far. We aimed to understand the material surface features and mental representations associated with material change over time by the human visual system, and possibly wider cognitive systems. To this end, we performed a series of experiments with varying methodologies. These included a psychophysics experiment, online experiments, and data collection during a science festival. The latter showed that the general public mentioned “Faded (colour)” most often to describe material change over time and that specific material surface change features clustered around specific materials. In another experiment, material type, but not colour or the geometrical distribution, had a significant effect on perceived material change. Other experiments partially contradicted this finding. It was found that perceived material type showed a significant, non-linear association with perceived material change, replicating earlier findings on the effect of material type. In contrast, material surface lightness, a constituent of colour, was associated with perceived material change. The same held for components of the geometrical distribution. They showed a minor contribution to the perception of material change, but a major one to perceived material type. Together, our findings suggest that the human visual system seems to use constituents of material surface colour as a cue to material change over time. The geometrical distribution seems to play a minor role. Although these contributions may vary with material type, as our findings showed that material type affected the perception of material change over time.
-
Development of Three-Dimensional Learning Materials for Key Stage 3 Design and Engineering Students. An Introductory Aid to SolidWorks CAD Teaching for Secondary SchoolsThis thesis looks at the development of a physical 3D learning model designed to introduce key stage 3 students to the basics of SolidWorks with the ultimate aim of developing the model to a level where schools can use it in the education of students. The purpose of this thesis is to identify any problems with the author’s final year undergraduate project (a three-dimensional card model of Tower Bridge, which features instructions to help teach the fundamentals of SolidWorks), and to create a new learning material based on those findings. The creation of the new learning material was in part based on feedback during visits to local secondary schools. Small scale user trials were also conducted throughout the product development in order to gain first-hand insight into how the solution was meeting its objectives, i.e. being a viable learning pack for Secondary Schools. The overall project aim was to create 3 – Dimensional teaching material designed to assist in classrooms for secondary education. This aim was partially realised in that a clear and concise learning path was created. However, due to lack of engagement from local secondary schools it was not feasible to conduct user trials. These trials and subsequent review have been suggested as possible future work. It should be noted that apart from the Tower Bridge product, reviewed in chapter 3, all work presented within this thesis was conducted as part of this master study.
