Brake system simulation to predict brake pedal feel in a passenger car.
KeywordBraking system performance
Brake pedal feel
Hydraulic brake system
MetadataShow full item record
AbstractBraking system characteristics, brake system performance and brake system component design parameters that influence brake pedal `feel¿ in a passenger car have been studied using the simulation modelling package AMESim, in particular to model the linear and nonlinear characteristics of internal components. A passenger car hydraulic brake system simulation model incorporating the brake pedal, booster, master cylinder, brake lines and calipers has been developed to predict brake system response to assist in the design of braking systems with the desired brake pedal force / travel characteristic characteristics to create good brake pedal `feel¿. This has highlighted the importance of system components, in particular the master cylinder and caliper seal deformation, and the operating characteristics of the booster in determining the brake pedal force / travel characteristic. The potential contribution of these 3 components to brake pedal `feel¿ improvement has been investigated, and the results of the AMESim model have been verified using experimental measurement data. The model can be used in the future to provide an accurate prediction of brake system response at the design stage thereby saving time and cost.
Versionpublished version paper
CitationDay, A. J., Ho, H. P., Hussain, K. and Johnstone, A. (2009). Brake system simulation to predict brake pedal feel in a passenger car. Warrendale, PA: SAE International. Report No. 09BC-0077.
Link to publisher’s versionhttp://www.sae.org/technical/papers/2009-01-3043
Showing items related by title, author, creator and subject.
Lightweight friction brakes for a road vehicle with regenerative braking. Design analysis and experimental investigation of the potential for mass reduction of friction brakes on a passenger car with regenerative braking.Day, Andrew J.; Olley, Peter; Qi, Hong Sheng; Sarip, S. Bin (University of BradfordSchool of Engineering, Design and Technology, 2012-11-02)One of the benefits of electric vehicles (EVs) and hybrid vehicles (HVs) is their potential to recuperate braking energy. Regenerative braking (RB) will minimize duty levels on the brakes, giving advantages including extended brake rotor and friction material life and, more significantly, reduced brake mass and minimised brake pad wear. In this thesis, a mathematical analysis (MATLAB) has been used to analyse the accessibility of regenerative braking energy during a single-stop braking event. The results have indicated that a friction brake could be downsized while maintaining the same functional requirements of the vehicle braking in the standard brakes, including thermomechanical performance (heat transfer coefficient estimation, temperature distribution, cooling and stress deformation). This would allow lighter brakes to be designed and fitted with confidence in a normal passenger car alongside a hybrid electric drive. An approach has been established and a lightweight brake disc design analysed FEA and experimentally verified is presented in this research. Thermal performance was a key factor which was studied using the 3D model in FEA simulations. Ultimately, a design approach for lightweight brake discs suitable for use in any car-sized hybrid vehicle has been developed and tested. The results from experiments on a prototype lightweight brake disc were shown to illustrate the effects of RBS/friction combination in terms of weight reduction. The design requirement, including reducing the thickness, would affect the temperature distribution and increase stress at the critical area. Based on the relationship obtained between rotor weight, thickness and each performance requirement, criteria have been established for designing lightweight brake discs in a vehicle with regenerative braking.
The Influence of Braking System Component Design Parameters on Pedal Force and Displacement Characteristics. Simulation of a passenger car brake system, focusing on the prediction of brake pedal force and displacement based on the system components and their design characteristics.Day, Andrew J.; Hussain, Khalid; Ho, Hon Ping (University of BradfordSchool of Engineering, Design and Technology, 2015-10-23)This thesis presents an investigation of braking system characteristics, brake system performance and brake system component design parameters that influence brake pedal force / displacement characteristics as ‘felt’ by the driver in a passenger car. It includes detailed studies of individual brake system component design parameters, operation, and the linear and nonlinear characteristics of internal components through experimental study and simulation modelling. The prediction of brake pedal ‘feel’ in brake system simulation has been achieved using the simulation modelling package AMESim. Each individual brake system component was modelled individually before combining them into the whole brake system in order to identify the parameters and the internal components characteristics that influence the brake pedal ‘feel’. The simulation predictions were validated by experimentally measured data and demonstrated the accuracy of simulation modelling. Axisymmetric Finite Element Analysis (using the ABAQUS software) was used to predict the behaviour of nonlinear elastomeric internal components such as the piston seal and the booster reaction disc which was then included in the AMESim simulation model. The seal model FEA highlighted the effects of master cylinder and caliper seal deformation on the brake pedal ‘feel’. The characteristics of the brake booster reaction disc were predicted by the FEA and AMESim simulation modelling and these results highlighted the importance of the nonlinear material characteristics, and their potential contribution to brake pedal ‘feel’ improvement. A full brake system simulation model was designed, prepared, and used to predict brake system performance and to design a system with better brake pedal ‘feel’. Each of the brake system component design parameters was validated to ensure that the braking system performance was accurately predicted. The critical parameter of brake booster air valve spring stiffness was identified to improve the brake ‘pedal ‘feel’. This research has contributed to the advancement of automotive engineering by providing a method for brake system engineers to design a braking system with improved pedal ‘feel’. The simulation model can be used in the future to provide an accurate prediction of brake system performance at the design stage thereby saving time and cost.
Analysis of the transient thermomechanical behaviour of a lightweight brake disc for a regenerative braking systemSarip, S. Bin; Day, Andrew J.; Olley, Peter; Qi, Hong Sheng (2013)Regenerative braking would extend the working range of an EV or HV provided that any extra energy consumption from increased vehicle mass and system losses did not outweigh the saving from energy recuperation, also reduce duty levels on the brakes themselves, giving advantages including extended brake rotor and friction material life, but more importantly reduced brake mass, minimise brake pad wear. The objective of this research is to define thermal performance on lightweight disc brake models. Thermal performance was a key factor which was studied using the 3D model in FEA simulations. Ultimately a design method for lightweight brakes suitable for use on any car-sized hybrid vehicle was used from previous analysis. The design requirement, including reducing the thickness, would affect the temperature distribution and increase stress at the critical area. Based on the relationship obtained between rotor weight, thickness, undercut effect and offset between hat and friction ring, criteria have been established for designing lightweight brake discs in a vehicle with regenerative braking.