Show simple item record

dc.contributor.authorNajim, H.S.
dc.contributor.authorMosleh, M.F.
dc.contributor.authorAbd-Alhameed, Raed
dc.date.accessioned2022-11-05T21:41:25Z
dc.date.accessioned2022-12-02T16:07:39Z
dc.date.available2022-11-05T21:41:25Z
dc.date.available2022-12-02T16:07:39Z
dc.date.issued2022-09
dc.identifier.citationNajim HS, Mosleh MF and Abd-Alhameed R (2022) Design a MIMO printed dipole antenna for 5G sub-band applications. Indonesian Journal of Electrical Engineering and Computer Science. 27(3): 1649-1660.en_US
dc.identifier.urihttp://hdl.handle.net/10454/19237
dc.descriptionYesen_US
dc.description.abstractIn this paper, a planar multiple input, multiple output (MIMO) dipole antenna for a future sub-6 GHz 5G application is proposed. The planar MIMO structure consists of 4 antenna elements with an overall size of 150×82×1 mm3. The single antenna element is characterized by a size of 32.5×33.7×1 mm3 printed on an FR-4 dielectric substrate with εr=4.4 and tanδ=0.02. The suggested antenna structure exhibits good impedance bandwidth equal to 3.24 GHz starting from 3.3 to 6.6 GHz with an S11 value of less than -10 dB (S11≤-10 dB) with antenna gain varying from 5.2 up to 7.05 dB in the entire band, which covers all the sub-6 GHz frequency band of the 5G application. Good isolation is achieved between the MIMO elements due to low surface waves inside the MIMO antenna substrate. The radiation of the MIMO antenna structure can be manipulated and many beam-types can be achieved as desired. The high-frequency structure simulator (HFSS) software package is used to design and simulate the proposed structure, while the CST MWS is used to validate the results.en_US
dc.language.isoenen_US
dc.publisherIndonesian
dc.relation.isreferencedbyhttps://doi.org/10.11591/ijeecs.v27.i3.pp1649-1660en_US
dc.rightsThis is an open access article under the CC BY-SA license (https://creativecommons.org/licenses/by-sa/4.0/)en_US
dc.subject5Gen_US
dc.subjectOmnidirectional radiationen_US
dc.subjectPrinted dipole antennaen_US
dc.subjectSub-6 GHzen_US
dc.titleDesign a MIMO printed dipole antenna for 5G sub-band applicationsen_US
dc.status.refereedYesen_US
dc.date.Accepted2022-07-04
dc.date.application2022-09
dc.typeArticleen_US
dc.type.versionPublished versionen_US
dc.rights.licenseCC-BY-SAen_US
dc.date.updated2022-11-05T21:41:27Z
refterms.dateFOA2022-12-02T16:08:16Z
dc.openaccess.statusopenAccessen_US


Item file(s)

Thumbnail
Name:
28317-57101-1-PBDrMahmood2022.pdf
Size:
1.263Mb
Format:
PDF
Description:
Abd-Alhameed_et_al_IJoEEaCC

This item appears in the following Collection(s)

Show simple item record