Show simple item record

dc.contributor.authorAbdulzahra, D.H.
dc.contributor.authorAlnahwi, F.
dc.contributor.authorAbdullah, A.S.
dc.contributor.authorAl-Yasir, Yasir I.A.
dc.contributor.authorAbd-Alhameed, Raed
dc.date.accessioned2022-10-07T09:19:09Z
dc.date.accessioned2022-10-25T10:52:03Z
dc.date.available2022-10-07T09:19:09Z
dc.date.available2022-10-25T10:52:03Z
dc.date.issued2022-09
dc.identifier.citationAbdulzahra DH, Alnahwi F, Abdullah AS et al (2022) A miniaturized triple-band antenna based on square split ring for IoT applications. Electronics. 11(18): 2818.en_US
dc.identifier.urihttp://hdl.handle.net/10454/19185
dc.descriptionYesen_US
dc.description.abstractThis article presents a miniaturized triple-band antenna for Internet of Things (IoT) applications. The miniaturization is achieved by using a split square ring resonator and half ring resonator. The antenna is fabricated on an FR4 substrate with dimensions of (33 × 22 × 1.6) mm3. The proposed antenna resonates at the frequencies 2.4 GHz, 3.7 GHz, and 5.8 GHz for WLAN and WiMax applications. The obtained −10 dB bandwidth for the three bands of the proposed antenna are 300 MHz, 360 MHz, and 900 MHz, respectively. The measured reflection coefficient values of the proposed antenna corresponding to each resonant frequency are equal to −14.772 dB, −20.971 dB, and −28.1755 dB, respectively. The measured gain values are 1.43 dBi, 0.89 dBi, and 1 dBi, respectively, at each resonant frequency. There is a good agreement between the measured and simulated results, and both show an omnidirectional radiation pattern at each of the antenna resonant frequencies that is suitable for IoT portable devices.en_US
dc.language.isoenen_US
dc.rights© 2022 the Authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).en_US
dc.subjectMultiband antennaen_US
dc.subjectIoT applicationsen_US
dc.subjectReflection coefficienten_US
dc.subjectMonopoleen_US
dc.subjectSplit ring resonator (SRR)en_US
dc.titleA miniaturized triple-band antenna based on square split ring for IoT applicationsen_US
dc.status.refereedYesen_US
dc.date.Accepted2022-09-05
dc.date.application2022-09-07
dc.typeArticleen_US
dc.type.versionPublished versionen_US
dc.identifier.doihttps://doi.org/10.3390/electronics11182818
dc.rights.licenseCC-BYen_US
dc.date.updated2022-10-07T09:19:12Z
refterms.dateFOA2022-10-25T10:52:40Z
dc.openaccess.statusopenAccessen_US


Item file(s)

Thumbnail
Name:
electronics-11-02818.pdf
Size:
3.300Mb
Format:
PDF
Description:
Abd-Alhameed_et_al_Electronics_2022

This item appears in the following Collection(s)

Show simple item record