Showing items related by title, author, creator and subject.

• 

  1,4‐Addition of TMSCCl3 to nitroalkenes: efficient reaction conditions and mechanistic understanding

  Wu, Na; Wahl, B.; Woodward, S.; Lewis, W. (2014-06)

  Improved synthetic conditions allow preparation of TMSCCl3 in good yield (70 %) and excellent purity. Compounds of the type NBu4X [X=Ph3SiF2 (TBAT), F (tetrabutylammonium fluoride, TBAF), OAc, Cl and Br] act as catalytic promoters for 1,4‐additions to a range of cyclic and acyclic nitroalkenes, in THF at 0–25 °C, typically in moderate to excellent yields (37–95 %). TBAT is the most effective promoter and bromide the least effective. Multinuclear NMR studies (1H, 19F, 13C and 29Si) under anaerobic conditions indicate that addition of TMSCCl3 to TBAT (both 0.13 M ) at −20 °C, in the absence of nitroalkene, leads immediately to mixtures of Me3SiF, Ph3SiF and NBu4CCl3. The latter is stable to at least 0 °C and does not add nitroalkene from −20 to 0 °C, even after extended periods. Nitroalkene, in the presence of TMSCCl3 (both 0.13 M at −20 °C), when treated with TBAT, leads to immediate formation of the 1,4‐addition product, suggesting the reaction proceeds via a transient [Me3Si(alkene)CCl3] species, in which (alkene) indicates an Si⋅⋅⋅O coordinated nitroalkene. The anaerobic catalytic chain is propagated through the kinetic nitronate anion resulting from 1,4 CCl3− addition to the nitroalkene. This is demonstrated by the fact that isolated NBu4[CH2=NO2] is an efficient promoter. Use of H2C=CH(CH2)2CH=CHNO2 in air affords radical‐derived bicyclic products arising from aerobic oxidation.
• 

  Application of dehydroabietic acid in palladium-catalysed enyne cycloisomerisation

  Wu, Na; Li, R.; Cui, F.; Pan, Y. (2017-07)

  Dehydroabietic acid (DAA) promotes palladium(0)‐catalysed cyclisations of arene‐tethered 1,7‐enynols and 1,m‐enynoates (m=6,7) to give fused carbocyclic dienes. 6,6,6,5‐Tetracyclic lactones are accessible by one‐pot cycloisomerisation/Diels–Alder reaction/lactonisation from 1,7‐enynols. Furthermore, asymmetric counteranion‐directed catalysis has been developed, which afforded an indene derivative with an all‐carbon quaternary stereogenic center.
• Nanoscale ZrRGOCuFe layered double hydroxide composites for enhanced photocatalytic degradation of dye contaminant

  Kumar, O.P.; Ashiq, M.N.; Shah, S.S.A.; Akhtar, S.; Mudhar, M.A.; Mujtaba, Iqbal; Rehman, A. ur (2021-06-15)

  Coprecipitation method was used to prepare non-stoichiometric pristine copper and iron layered double hydroxide (LDH) doped with zirconium and embedded with reduced graphene oxide. The composite materials (ZrRGOCuFe LDHs) were studied for the photodegradation of methylene blue (MB) dye as a model contaminant from an aqueous solution. These composites were fully characterized by X-rays diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), Photoluminescence (PL), Raman spectroscopy and Electrochemical Impedance Spectroscopy (EIS). The results of Raman, Photoluminescence and Electrochemical Impedance Spectroscopy revealed the presence of oxygen defects level in the composites. Such defects are believed to be essential for boosting the catalytic potential of the composites. The secondary pollution manifested by transition metal ions is usually tackled by inducing heterogeneous catalysis. Herein, pristine CuFe LDH has been doped with Zr and RGO moieties to realize heterogeneous catalysis within ZrRGOCuFe LDH dopants. An admirable band ranging between 1.74 and 2.0 eV was obtained for the doped materials. The remarkable photodegradation efficiency of 95.2% was achieved by using heterogeneous photocatlyst Zr0.6RGOCuFe LDH within 75 min at a pH of 7, photocatalyst dosage of 1.0 g/L and methylene blue dye solution of 10 ppm under visible light irradiation. The total organic content (TOC) analysis has revealed removal of 92% organic content. Moreover, the catalyst has the potentia to maitain sufficient stability and reusability capacity even after three successive cycles. The reaction kinetics and proposed photocatalytic mechanism were also explained in detail.