Show simple item record

dc.contributor.authorKiani, S.H.
dc.contributor.authorAltaf, A.
dc.contributor.authorAnjum, M.R.
dc.contributor.authorAfridi, S.
dc.contributor.authorArain, Z.A.
dc.contributor.authorAnwar, S.
dc.contributor.authorKhan, S.
dc.contributor.authorAlibakhshikenari, M.
dc.contributor.authorLalbakhsh, A.
dc.contributor.authorKhan, M.A.
dc.contributor.authorAbd-Alhameed, Raed
dc.contributor.authorLimiti, E.
dc.date.accessioned2021-11-02T22:39:30Z
dc.date.accessioned2021-11-23T14:53:22Z
dc.date.available2021-11-02T22:39:30Z
dc.date.available2021-11-23T14:53:22Z
dc.date.issued2021-11-08
dc.identifier.citationKiani SH, Altaf A, Anjum MR et al (2021) MIMO Antenna System for Modern 5G Handheld Devices with Healthcare and High Rate Delivery. Sensors. 21(21): 7415.en_US
dc.identifier.urihttp://hdl.handle.net/10454/18644
dc.descriptionYesen_US
dc.description.abstractIn this work, a new prototype of the eight-element MIMO antenna system for 5G communications, internet of things, and networks has been proposed. This system is based on an H-shaped monopole antenna system that offers 200 MHz bandwidth ranges between 3.4-3.6GHz, and the isolation between any two elements is well below -12dB without using any decoupling structure. The proposed system is designed on a commercially available 0.8mm-thick FR4 substrate. One side of the chassis is used to place the radiating elements, while the copper from the other side is being removed to avoid short-circuiting with other components and devices. This also enables space for other systems, sub-systems, and components. A prototype is fabricated and excellent agreement is observed between the experimental and the computed results. It was found that ECC is 0.2 for any two radiating elements which is consistent with the desirable standards, and channel capacity is 38 bps/Hz which is 2.9 times higher than 4x4 MIMO configuration. In addition, single hand mode and dual hand mode analysis are conducted to understand the operation of the system under such operations and to identify losses and/or changes in the key performance parameters. Based on the results, the proposed antenna system will find its applications in modern 5G handheld devices and internet of things with healthcare and high rate delivery. Besides that, its design simplicity will make it applicable for mass production to be used in industrial demands.en_US
dc.language.isoenen_US
dc.rights(c) 2021 The Authors. This is an Open Access article distributed under the Creative Commons CC-BY license (https://creativecommons.org/licenses/by/4.0/)en_US
dc.subjectMIMO antenna systemsen_US
dc.subject5Gen_US
dc.subjectHigh gainen_US
dc.subjectInternet of Thingsen_US
dc.subjectIoTen_US
dc.subjectWide bandwidthen_US
dc.subjectHealthcareen_US
dc.subjectHigh isolationen_US
dc.subjectHigh rate deliveryen_US
dc.titleMIMO Antenna System for Modern 5G Handheld Devices with Healthcare and High Rate Deliveryen_US
dc.status.refereedYesen_US
dc.date.Accepted2021-11-02
dc.typeArticleen_US
dc.type.versionPublished versionen_US
dc.identifier.doihttps://doi.org/10.3390/s21217415
dc.date.updated2021-11-02T22:39:32Z
refterms.dateFOA2021-11-23T14:53:43Z
dc.openaccess.statusGolden_US


Item file(s)

Thumbnail
Name:
AcceptedManuscript_sensors-140 ...
Size:
2.238Mb
Format:
PDF
Description:
Keep suppressed - AAM
Thumbnail
Name:
kiani_et_al_2021.pdf
Size:
7.305Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record