Half-sandwich metal complexes are of considerable interest in medicine, material, and nanomaterial chemistry. The design of libraries of such complexes with particular reactivity and properties is therefore a major quest. Here, we report the unique and peculiar reactivity of eight apparently 16-electron half-sandwich metal (ruthenium, osmium, rhodium, and iridium) complexes based on benzene-1,2-dithiolato and 3,6-dichlorobenzene-1,2-dithiolato chelating ligands. These electron-deficient complexes do not react with electron-donor pyridine derivatives, even with the strong σ-donor 4-dimethylaminopyridine (DMAP) ligand. The Ru, Rh, and Ir complexes accept electrons from the triphenylphosphine ligand (σ-donor, π-acceptor), whilst the Os complexes were found to be the first examples of non-electron-acceptor electron-deficient metal complexes. We rationalized these unique properties by a combination of experimental techniques and DFT/TDFT calculations. The synthetic versatility offered by this family of complexes, the low reactivity at the metal center, and the facile functionalization of the non-innocent benzene ligands is expected to allow the synthesis of libraries of pseudo electron-deficient half-sandwich complexes with unusual properties for a large range of applications.

Half-sandwich complexes of precious metals are a versatile class of organometallic compounds. Their accessibility, robustness, and air-stability are examples of the unique properties that allow their applications in various fields of chemistry (e.g. catalysis), and as anticancer drug candidates. Half-sandwich complexes generally follow the 18-electron rule, although some stable 16-electron (16-e) complexes have been isolated. The latter are generally coordinatively unsaturated leading to potential applications in catalysis and as precursors for 18-electron (18-e) complexes. Six 16-e complexes [Ru(η6-p-cymene)(1,2-benzene-1,2-dithiolato)] (1), [Os(η6-p-cymene) (1,2-benzene-1,2-dithiolato)] (2), [Ir(η5-pentamethylcyclopentadiene) (1,2-benzene-1,2-dithiolato)] (3), [Ru(η6-p-cymene)(1,2-dicarba-closo- dodecaborane-1,2-dithiolato)] (4), [Os(η6-p-cymene)(1,2-dicarba-closo- dodecaborane-1,2-dithiolato)] (5), and [Ir(η5-pentamethylcyclopentadiene)(1,2-dicarba-closo-dodecaborane-1,2-dithiolato)] (6) were synthesised by reactions between 1,2-benzenedithiol (1, 2, 3) or 1,2-dicarba-closo-dodecaborane-1,2-dithiol (4, 5, 6) and the corresponding metal dimers. In solution (10-4 M) at ambient temperature, the six complexes are stable electron-deficient 16-electron monomers, although the formation of a more electronically stable 18-electron dimer is observed for complex 1 at millimolar concentrations. The six complexes exhibit dramatic differences in reactivity towards electron-donor molecule. The in-vitro anti-inflammatory activities of the 16-e complexes 1 – 6 were investigated on MRC 5-fibroblast and lipopolysaccharide (LPS)-activated RAW 264.7 macrophages. Cells were exposed for 24h to the 16-e complexes 1 – 6 in the concentrations range of 10, 20, 50 and 100uM. After this, drugs were removed and nitric oxide (NO) concentration in the cultured medium was determined by the Griess reaction. Cells were then washed and placed in fresh growth medium for a further 24h as a recovery period. Cell viability was then assessed by MTT assay. Our preliminary data showed that complex 1 – 6 showed some anti-inflammatory effect on both lines, but with slightly differences between them, suggesting that the M-S2C2 scaffold of the electron-deficient complexes is the main structural moiety responsible for such effect. Further studies will focus on the matching these effects with their structures.

We report an evaluation of the cytotoxicity of a series of electron-deficient (16-electron) half-sandwich precious metal complexes of ruthenium, osmium and iridium ([Os/Ru(η6-pcymene)( 1,2-dicarba-closo-dodecarborane-1,2-dithiolato)] (1/2), [Ir(η5-pentamethylcyclopentadiene)(1,2-dicarba-closo-dodecarborane- 1,2-dithiolato)] (3), [Os/Ru(η6-p-cymene)(benzene-1, 2-dithiolato)] (4/5) and [Ir(η5-pentamethylcyclopentadiene) (benzene-1,2-dithiolato)] (6)) towards RAW 264.7 murine macrophages and MRC-5 fibroblast cells. Complexes 3 and 6 were found to be non-cytotoxic. The anti-inflammatory activity of 1–6 was evaluated in both cell lines after nitric oxide (NO) production and inflammation response induced by bacterial endotoxin lipopolysaccharide (LPS) as the stimulus. All metal complexes were shown to exhibit dose-dependent inhibitory effects on LPS-induced NO production on both cell lines. Remarkably, the two iridium complexes 3 and 6 trigger a full anti-inflammatory response against LPS-induced NO production, which opens up new avenues for the development of non-cytotoxic anti-inflammatory drug candidates with distinct structures and solution chemistry from that of organic drugs, and as such with potential novel mechanisms of action.

Well-defined N,N’-(dimethylamino)ethyl acrylate (DMAEA) functionalized polymeric stars have been synthesized via an arm-first approach. Utilizing reversible addition–fragmentation chain transfer polymerization, linear homopolymers (PEGA, PHEA) were chain extended with DMAEA and a divinyl crosslinker to produce a series of crosslinked polymeric stars. These stars were characterized using a range of techniques including NMR, SEC, DLS and TEM analysis. The hydrolytic behavior of the DMAEA when tethered within a micellar core was investigated by1 H NMR spectroscopy and was found to be strongly dependent on temperature. At elevated temperatures either a higher crosslinking density or a longer arm length was found to offer greater protection to the amine resulting in slower hydrolysis, with hydrolysis found to level off at a lower final percentage hydrolysis. In contrast, the composition and nature of the arm was found to have little impact on the hydrolysis, with the same trends relating to the effect of temperature and crosslinking density observed with a linear (HEA) and a brush (PEGA) arm. Additionally, the release of DMAE from the polymeric stars was successfully confirmed through the use of an enzymatic assay, producing a concentration of DMAE in good agreement with the theoretical concentration based on the 1H NMR spectroscopic analysis.

Osmium nanocrystals can be fabricated by electron (3–50 nm, formed by atom migration), 785–815 nm laser (20–50 nm, in micelle islands), and microwave (ca. 1 nm in arrays, >100 mg scale) irradiation of a polymer-encapsulated OsII carborane; microfocus X-ray absorption studies at the Os LIII-edge show differences between the three preparation methods, suggesting that the electron-beam irradiated materials have a significant support interaction and/or surface oxidation, while the laser and microwave samples are more like metallic osmium.

2D materials such as graphene, LAPONITE® clays or molybdenum disulfide nanosheets are of extremely high interest to the materials community as a result of their high surface area and controllable surface properties. While several methods to access 2D inorganic materials are known, the investigation of 2D organic nanomaterials is less well developed on account of the lack of ready synthetic accessibility. Crystallization-driven self-assembly (CDSA) has become a powerful method to access a wide range of complex but precisely-defined nanostructures. The preparation of 2D structures, however, particularly those aimed towards biomedical applications, is limited, with few offering biocompatible and biodegradable characteristics as well as control over self-assembly in two dimensions. Herein, in contrast to conventional self-assembly rules, we show that the solubility of polylactide (PLLA)-based amphiphiles in alcohols results in unprecedented shape selectivity based on unimer solubility. We use log Poct analysis to drive solvent selection for the formation of large uniform 2D diamond-shaped platelets, up to several microns in size, using long, soluble coronal blocks. By contrast, less soluble PLLA-containing block copolymers yield cylindrical micelles and mixed morphologies. The methods developed in this work provide a simple and consistently reproducible protocol for the preparation of well-defined 2D organic nanomaterials, whose size and morphology are expected to facilitate potential applications in drug delivery, tissue engineering and in nanocomposites.