Improved bandwidth low-profile miniaturized multi-arm logarithmic spiral antenna
AuthorZhu, Shaozhen (Sharon)
Ghazaany, Tahereh S.
Abd-Alhameed, Raed A.
Jones, Steven M.R.
Noras, James M.
Van Buren, T.
KeywordVertical polarisation; Miniaturised antenna; Omni-directional antenna
A low-profile (λ/43) miniaturized multi-element antenna is presented, which displays vertical polarization with an omni-directional radiation pattern. The antenna uses a logarithmic spiral shape as the main radiating element such that the impedance bandwidth of the antenna is much improved in comparison with both a strip-line square spiral design and a strip-line circular spiral design. The antenna demonstrates stable gain and useful efficiency over the operating frequency band. Significantly, the antenna provides a low profile, omnidirectional pattern in the azimuth plane, polarizes normal to the ground-plane with a 1.2% bandwidth and 0.5 dBi gain.
MetadataShow full item record
VersionNo full-text in the repository
CitationZhu S, Ghazaany TS, Abd-Alhameed RA et al (2014) Improved bandwidth low-profile miniaturized multi-arm logarithmic spiral antenna. In: Proceedings of the 8th European Conference on Antennas and Propagation. 6-11 Apr 2014, The Hague, The Netherlands: 1918-1920.
Link to publisher’s versionhttps://doi.org/10.1109/EuCAP.2014.6902174
Showing items related by title, author, creator and subject.
Model and design of small compact dielectric resonator and printed antennas for wireless communications applications. Model and simulation of dialectric resonator (DR) and printed antennas for wireless applications; investigations of dual band and wideband responses including antenna radiation performance and antenna design optimization using parametric studiesAbd-Alhameed, Raed A.; McEwen, N.J.; Mujtaba, Iqbal M.; Elmegri, Fauzi (University of BradfordFaculty of Engineering and Informatics, 2015)Dielectric resonator antenna (DRA) technologies are applicable to a wide variety of mobile wireless communication systems. The principal energy loss mechanism for this type of antenna is the dielectric loss, and then using modern ceramic materials, this may be very low. These antennas are typically of small size, with a high radiation efficiency, often above 95%; they deliver wide bandwidths, and possess a high power handling capability. The principal objectives of this thesis are to investigate and design DRA for low profile personal and nomadic communications applications for a wide variety of spectrum requirements: including DCS, PCS, UMTS, WLAN, UWB applications. X-band and part of Ku band applications are also considered. General and specific techniques for bandwidth expansion, diversity performance and balanced operation have been investigated through detailed simulation models, and physical prototyping. The first major design to be realized is a new broadband DRA operating from 1.15GHz to 6GHz, which has the potential to cover most of the existing mobile service bands. This antenna design employs a printed crescent shaped monopole, and a defected cylindrical DRA. The broad impedance bandwidth of this antenna is achieved by loading the crescent shaped radiator of the monopole with a ceramic material with a permittivity of 81. The antenna volume is 57.0 37.5 5.8 mm3, which in conjunction with the general performance parameters makes this antenna a potential candidate for mobile handset applications. The next class of antenna to be discussed is a novel offset slot-fed broadband DRA assembly. The optimised structure consists of two asymmetrically located cylindrical DRA, with a rectangular slot feed mechanism. Initially, designed for the frequency range from 9GHz to 12GHz, it was found that further spectral improvements were possible, leading to coverage from 8.5GHz to 17GHz. Finally, a new low cost dual-segmented S-slot coupled dielectric resonator antenna design is proposed for wideband applications in the X-band region, covering 7.66GHz to 11.2GHz bandwidth. The effective antenna volume is 30.0 x 25.0 x 0.8 mm3. The DR segments may be located on the same side, or on opposite sides, of the substrate. The end of these configurations results in an improved diversity performance.
Miniaturized tunable conical helix antennaZhu, F.; Ghazaany, Tahereh S.; Abd-Alhameed, Raed A.; Jones, Steven M.R.; Noras, James M.; Suggett, T.; Marker, S. (2014)A miniaturized conical helix antenna is presented, which displays vertical polarization with electrically small dimensions of 10mm×10mm×45mm. The resonance of the antenna is made tunable by adding a variable digital MEMS capacitor load at the bottom of the helix, giving a tuning range of 316 MHz to 400 MHz. The antenna demonstrates considerable impedance matching bandwidth and gain over the entire tuning frequency band. Most importantly, the antenna is capable of compact, flexible and easy integration into a wireless device package or for platform installation.
Multiple Band-Notched UWB Antenna With Band-Rejected Elements Integrated in the Feed LineZhu, F.; Gao, S.; Ho, A.T.S.; Abd-Alhameed, Raed A.; See, Chan H.; Brown, T.W.C.; Li, J.; Wei, G.; Xu, J. (2013)To mitigate potential interferences with coexisting wireless systems operating over 3.3-3.6 GHz, 5.15-5.35 GHz, or 5.725-5.825 GHz bands, four novel band-notched antennas suitable for ultra-wideband (UWB) applications are proposed. These include UWB antennas with a single wide notched band, a single narrow notched band, dual notched bands, and triple notched bands. Each antenna comprises a half-circle shaped patch with an open rectangular slot and a half-circle shaped ground plane. Good band-notched performance is achieved by using high permittivity and low dielectric loss substrate, and inserting quarter-wavelength horizontal/vertical stubs or alternatively embedding quarter-wavelength open-ended slots within the feed line. The results of both simulation and measurement confirm that the gain suppression of the single and multiple band-notched antennas in each desired notched band are over 15 dB and 10 dB, respectively. The radiation pattern of the proposed triple band-notched design is relatively stable across the operating frequency band.