Finite element analysis and simple design calculation method for rectangular CFSTs under local bearing forces
Yang, Y. Wen, Z. Dai, Xianghe
Yang, Y.
Wen, Z.
Dai, Xianghe
Publication Date
2016-09
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
closedAccess
Accepted for publication
2016-05-21
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
Rectangular concrete-filled steel tube (CFST) may be subjected to local bearing forces transmitted from brace members while being used as a chord of a truss, and thus development of finite element analysis (FEA) and simple design calculation method for rectangular CFSTs under local bearing forces are very important to ensure the safety and reliable design of such a truss with rectangular CFST chords in engineering practices. A three-dimensional FEA model was developed using ABAQUS software package to predict the performance of thin-walled rectangular CFST under local bearing forces. The preciseness of the predicted results was evaluated by comparison with experimental results reported in the available literature. The comparison and analysis show that the predicted failure pattern, load versus deformation curves and bearing capacity of rectangular CFST under local bearing forces obtained from FEA modelling were generally in good agreement with the experimental observations. After the validation, the FEA model was adopted for the mechanism analysis of typical rectangular CFSTs under local bearing forces. Finally, based on the parametric analysis, simple design equations were proposed to be used to calculate the bearing capacity of rectangular CFST under local bearing forces.
Version
No full-text in the repository
Citation
Yang Y, Wen Z and Dai X (2016) Finite element analysis and simple design calculation method for rectangular CFSTs under local bearing forces. Thin-Walled Structures. 106: 316-329.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article