Biaxially oriented polypropylene pipes: implications for impact and hydrostatic pressure resistance.
Morath, C.C, Ward, Ian M. Soliman, M. Voets, P. Kleppinger, R.
Morath, C.C,
Ward, Ian M.
Soliman, M.
Voets, P.
Kleppinger, R.
Publication Date
2006
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
Accepted for publication
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
The Leeds die drawing process has been used to produce biaxially oriented polypropylene pipes with significant enhancement of hoop mechanical properties in terms of tensile modulus and tensile strength owing to a unique orientation of the ¿ crystallites throughout their cross-section. Pendulum impact tests on these pipes show major improvements in impact resistance. Hydrostatic pressure tests were undertaken at room temperature 95 and 110°C. Major improvements in behaviour were found including more than an order of magnitude increase in lifetime at 95°C. Furthermore, the toughness was improved enormously leading to a brittle tough transition temperature below ¿70°C.
Version
No full-text available in the repository
Citation
Morath, C.C., Ward, I.M., Soliman, M. and Voets, P. et al. (2006). Biaxially oriented polypropylene pipes: implications for impact and hydrostatic pressure resistance. Plastics Rubber and Composites. Vol. 35. No. 10, pp. 447-454.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article