Loading...
Design of Power Efficient Power Amplifier for B3G Base Stations.
Hussaini, Abubakar S. ; Gwandu, B.A.L. ; ; Rodriguez, Jonathan
Hussaini, Abubakar S.
Gwandu, B.A.L.
Rodriguez, Jonathan
Publication Date
2010-11-11
End of Embargo
Supervisor
Rights
© 2010 IEEE. Reprinted, with permission: Hussaini, A. S., Gwandu, B. A. L., Abd-Alhameed, R. A. and Rodriguez, J. (2010). Design of Power Efficient Power Amplifier for B3G Base Stations. In: 9th International Symposium on Electronics and Telecommunications (ISETC 2010) , Timisoara, Romania, 11-12 November, 2010. IEEE. ISBN: 978-1-4244-8458-4. Paper No. 103, pp. 89-92. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Bradford¿s products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.
Peer-Reviewed
Yes
Open Access status
openAccess
Accepted for publication
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
Fourth generation systems require the use of both
amplitude and phase modulation to efficiently utilize the
available spectrum and to obtain high data rates, hence imposing
stringent requirements on the power amplifier in terms of
efficiency and linearity and requires the power amplifier to
operate linearly and efficiently. The B3G base station transceiver
Doherty power amplifier was designed to operate over the
frequency range of 3.47GHz to 3.53GHz mobile WiMAX band
using Freescale¿s N-Channel Enhancement-Mode Lateral
MOSFET Transistor, MRF7S38010HR3; The performances of
the Doherty amplifier are compared with that of the conventional
Class AB amplifier. The results of 43 dBm output power and
66% power added efficiency are achieved.
Version
Accepted manuscript
Citation
Hussaini AS, Gwandu BAL, Abd-Alhameed R et al (2010) Design of Power Efficient Power Amplifier for B3G Base Stations. In: 9th International Symposium on Electronics and Telecommunications (ISETC 2010) , Timisoara, Romania, 11-12 November, 2010. IEEE. No 103. Pp. 89-92.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Conference paper