Publication

Epitaxial growth and morphological characteristics of isotactic polypropylene/polyethylene blends: Scale effect and mold temperature

Deng, D.
Whiteside, Benjamin R.
Wang, F.
Norris, Keith
Zhang, Z.
Publication Date
2014-04-20
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
closedAccess
Accepted for publication
2014-01-17
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
This study investigates the influence of length scale effects (micro- and macro-injection molded parts) and mold temperature on the epitaxial growth and morphological characteristics in injection-molded bars of isotactic polypropylene (iPP)/high-density polyethylene (HDPE) blends. After preparing the blends with an iPP content of 70 wt% via melt extrusion, the injection-molded bars were formed using both micro and conventional injection molding. Samples were subsequently prepared from the moulded components to allow investigation of the internal morphology using wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and polarized light microscopy (PLM). The results indicated that the matching of micro scale and appropriate mold temperature was most favorable for epitaxial crystallization. The micro-parts had a large fraction of shear layer compared with macro-parts. The SEM observations showed that the shear layer of the former consisted of a highly oriented shish-kebab structure. Moreover, the effects of different methods of injection molding on the morphological characteristics of the micro-parts and macro-parts in different layers were elucidated in detail using PLM and SEM.
Version
No full-text in the repository
Citation
Deng P, Whiteside BR, Wang F et al (2014) Epitaxial growth and morphological characteristics of isotactic polypropylene/polyethylene blends: Scale effect and mold temperature. Polymer Testing. 34: 192-201.
Link to publisher’s version
Link to published version
Type
Article
Qualification name
Notes