Loading...
Breakage of carbon nanotube agglomerates within polypropylene matrix by solid phase die drawing
Lin, X. Gong, M. Innes, James R. Coates, Philip D. Korde, Sachin A.
Lin, X.
Gong, M.
Innes, James R.
Coates, Philip D.
Korde, Sachin A.
Publication Date
2020-01
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
Accepted for publication
2020-06-07
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
Melt blending of polyolefin/carbon nanotube (CNT) composites always leads to serious agglomeration of CNTs and hence inferior properties. Thus, well-dispersed CNTs within matrix are urgently required during processing. In this work, effective breakage of CNT agglomerates was achieved by solid-phase die drawing at a temperature below but near to the melting temperature of the matrix. Experimental results indicate that the incurred extensional stress provides a high orientation degree on the polypropylene (PP) matrix and consequently helps rupture CNT agglomerates, leading to improved alternating current（AC） conductivity by ~5–6 orders in magnitude. The reduced agglomerate ratio, the altered CNT networks (3D→2D), and the improved interfacial morphology between CNT and matrix are suggested to be responsible for the viscoelasticity variation of the composite melt and the improved property of PP/multiwalled CNTs (MWCNTs) composite. The initial loss of tensile ductility by the incorporation of MWCNTs is recovered by nearly 100%, which was attributed to the low agglomeration rate and improved interfacial morphology. This article provided the potential inspiration for the melt blending of polymer melt and CNTs.
Version
Accepted Manuscript
Citation
Lin X, Gong M, Innes JR et al (2020) Breakage of carbon nanotube agglomerates within polypropylene matrix by solid phase die drawing. Journal of Applied Polymer Science. 138(4): 49742.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article