Loading...
Recent research on composite beams with demountable shear connectors
Lam, Dennis Dai, Xianghe Rehman, Naveed
Lam, Dennis
Dai, Xianghe
Rehman, Naveed
Publication Date
2017-05
End of Embargo
Supervisor
Rights
© 2017 Ernst & Sohn Verlag für Architektur und technische
Wissenschaften GmbH & Co. KG, Berlin.
This is the pre-peer reviewed version of the following article: Lam D, Dai X, Ashour A et al (2017)
Recent research on composite beams with demountable shear connectors. Steel Construction:
Design and Research. 10(2): 125-134., which has been published in final form at
http://dx.doi.org/10.1002/stco.201710016
Peer-Reviewed
Yes
Open Access status
Accepted for publication
2017-04-06
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
This paper presents experimental and numerical investigation on an innovative composite floor system with deconstructability. In this system, a composite slab formed with metal profiled decking is connected to a steel beam using demountable shear connectors. A series of push tests was conducted to investigate the behaviour of this form of shear connectors. In addition to the push tests, a full-scale composite beam was tested to failure in the laboratory under a number of cycles of monotonic loading. For direct comparison, a similar composite beam test was conducted using same section size, concrete strength, but using the conventional welded headed stud connectors. Test results showed that the behaviour of the composite beam with demountable shear connectors is comparable with the specimen with welded shear connectors. After the test was terminated, the demountable shear connectors were unfastened and the composite floor can be easily lifted off from the steel beam. Test result showed that these demountable shear connectors possess high ductility in comparison with the equivalent welded shear connectors. Simple design rules currently use in Eurocode 4 for the welded shear connections and Eurocode 3 for bolts are proposed to predict the shear resistance of this form of demountable shear connectors.
Version
Pre-peer reviewed version
Citation
Lam D, Dai X, Ashour A et al (2017) Recent research on composite beams with demountable shear connectors. Steel Construction: Design and Research. 10(2): 125-134.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Technical paper