Ultrasonic micro‑injection moulding: characterisation of interfacial friction by varying feedstock shape and high‑speed thermal imaging for microneedle feature replication
Whiteside, Benjamin R.
Whiteside, Benjamin R.
Publication Date
2024-07-03
End of Embargo
Supervisor
Rights
© The Author(s) 2024. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Peer-Reviewed
Yes
Open Access status
openAccess
Accepted for publication
2024-06-25
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
This study explores the interfacial friction in ultrasonic micro-injection moulding by using different polymer feedstock
shapes, characterisation of micromoulding melts through thermal imaging and assessing microneedle feature replication.
Industry standard polypropylene pellets and discs with different thicknesses were used for varying the amount of interfacial
friction during sonication. High-speed thermal imaging and tooling containing sapphire windows were used to visualise
the melt characteristics. Moulded products were characterised using laser-scanning confocal microscopy to quantify
microneedle replication. The study demonstrates that (i) the interfacial area for the different feedstock shapes affects the
heating in ultrasonic micro-injection moulding significantly, (ii) disc-shaped feedstocks result in initially higher flow front
velocities and exhibit dominance of viscoelastic heating over interfacial friction and (iii) industrial pellet feedstocks provide
a good combination interfacial friction and viscoelastic heating and more viscosity reduction in overall leading to better
microreplication efficiency. The results presented could have a significant impact on the process development of ultrasonic
micro-injection moulding where process repeatability can be improved by controlling the interfacial friction. The research
provides an essential contribution to the development of this process, where interfacial frictional heating can be tailored
specifically for miniature functional components, offering improved precision and reduced energy use when compared with
conventional methods.
Version
Published version
Citation
Gülçür M, Gough T, Brown E et al (2024) Ultrasonic micro‑injection moulding: characterisation of interfacial friction by varying feedstock shape and high‑speed thermal imaging for microneedle feature replication. The International Journal of Advanced Manufacturing Technology. 133: 5515-5527.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article