Loading...
Employing a novel bioelastomer to toughen polylactide
Kang, H. Qiao, B. Wang, R. Wang, Z. Zhang, L. Ma, J. Coates, Philip D.
Kang, H.
Qiao, B.
Wang, R.
Wang, Z.
Zhang, L.
Ma, J.
Coates, Philip D.
Publication Date
2013
End of Embargo
Supervisor
Rights
(c) 2013 Elsevier Ltd. Full-text reproduced in accordance with the publisher's self-archiving policy. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ .
Peer-Reviewed
Open Access status
Accepted for publication
2013-02-28
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
Biodegradable, biocompatible polylactide (PLA) synthesized from renewable resources has attracted extensive interests over the past decades and holds great potential to replace many petroleum-derived plastics. With no loss of biodegradability and biocompatibility, we highly toughened PLA using a novel bioelastomer (BE)–synthesized from biomass diols and diacids. Although PLA and BE are immiscible, BE particles of ∼1 μm in diameter are uniformly dispersed in the matrix, and this indicates some compatibility between PLA and BE. BE significantly increased the cold crystallization ability of PLA, which was valuable for practical processing and performance. SEM micrographs of fracture surface showed a brittle-to-ductile transition owing to addition of BE. At 11.5 vol%, notched Izod impact strength improved from 2.4 to 10.3 kJ/m2, 330% increment; the increase is superior to previous toughening effect by using petroleum-based tougheners.
Version
Accepted manuscript
Citation
Kang H, Qiao B, Wang R et al (2013) Employing a novel bioelastomer to toughen polylactide. Polymer. 54(9): 2450-2458.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article