Creation of controlled polymer extrusion prediction methods in fused filament fabrication. An empirical model is presented for the prediction of geometric characteristics of polymer fused filament fabrication manufactured components

This thesis presents a model for the procedures of manufacturing Fused Filament Fabrication (FFF) components by calculating required process parameters using empirical equations. Such an empirical model has been required within the FFF field of research for a considerable amount of time and will allow for an expansion in understanding of the fundamental mathematics of FFF. Data acquired through experimentation has allowed for a data set of geometric characteristics to be built up and used to validate the model presented. The research presented draws on previous literature in the fields of additive manufacturing, machine engineering, tool-path programming, polymer science and rheology. Combining these research fields has allowed for an understanding of the FFF process which has been presented in its simplest form allowing FFF users of all levels to incorporate the empirical model into their work whilst still allowing for the complexity of the process. Initial literature research showed that Polylactic Acid (PLA) is now in common use within the field of FFF and therefore was selected as the main working material for this project. The FFF technique, which combines extrusion and Computer Aided Manufacturing (CAM) techniques, has a relatively recent history with little understood about the fundamental mathematics governing the process. This project aims to rectify the apparent gap in understanding and create a basis upon which to build research for understanding complex FFF techniques and/or processes involving extruding polymer onto surfaces.

URI

http://hdl.handle.net/10454/18399

Type

Thesis

Qualification name

PhD