Loading...
Impact resistance of deflection-hardening fiber reinforced concretes with different mixture parameters
Banyhussan, Q.S. Yildirim, Gurkan Anil, O. Erdem, R.T. Sahmaran, M.
Banyhussan, Q.S.
Yildirim, Gurkan
Anil, O.
Erdem, R.T.
Sahmaran, M.
Publication Date
2019-06
End of Embargo
Supervisor
Rights
© 2019 fib. International Federation for Structural Concrete.
This is the peer reviewed version of the following article: Banyhussan QS, Yildirim G, Anil O et al (2019) Impact resistance of deflection-hardening fiber reinforced concretes with different mixture parameters. Structural Concrete. 20(3): 1036-1050, which has been published in final form at https://doi.org/10.1002/suco.201800233. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.
Peer-Reviewed
Yes
Open Access status
openAccess
Accepted for publication
2018-12-27
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
The impact behavior of deflection-hardening High Performance Fiber Reinforced Cementitious Concretes (HPFRCs) was evaluated herein. During the preparation of HPFRCs, fiber type and amount, fly ash to Portland cement ratio and aggregate to binder ratio were taken into consideration. HPFRC beams were tested for impact resistance using free-fall drop-weight test. Acceleration, displacement and impact load vs. time graphs were constructed and their relationship to the proposed mixture parameters were evaluated. The paper also aims to present and verify a nonlinear finite element analysis, employing the incremental nonlinear dynamic analysis, concrete damage plasticity model and contact surface between the dropped hammer and test specimen available in ABAQUS. The proposed modelling provides extensive and accurate data on structural behavior, including acceleration, displacement profiles and residual displacement results. Experimental results which are further confirmed by numerical studies show that impact resistance of HPFRC mixtures can be significantly improved by a proper mixture proportioning. In the presence of high amounts of coarse aggregates, fly ash and increased volume of hybrid fibers, impact resistance of fiberless reference specimens can be modified in a way to exhibit relatively smaller displacement results after impact loading without risking the basic mechanical properties and deflection-hardening response with multiple cracking.
Version
Accepted manuscript
Citation
Banyhussan QS, Yildirim G, Anil O et al (2019) Impact resistance of deflection-hardening fiber reinforced concretes with different mixture parameters. Structural Concrete. 20(3): 1036-1050.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article