Publication

Thermal optimisation of polymer extrusion using in-process monitoring techniques

Vera-Sorroche, Javier
; 
Kelly, Adrian L.
; ; 
Coates, Philip D.
; 
Karnachi, N.
; 
Harkin-Jones, E.
; 
Li, K.
; 
Deng, J.
Publication Date
2013
End of Embargo
Supervisor
Keywords
Polymer extrusion, ; Melt temperature, ; Energy, ; Optimisation, ; Single-screw extrusion, ; Temperature-measurement, ; Thermocouple meshes, ; Performance, ; Extruder, ; Profile
Rights
Peer-Reviewed
Yes
Open Access status
Accepted for publication
Institution
Department
Awarded
Embargo end date
Collections
Engineering and Digital Technology Publications
Show all metadata
Additional title
Abstract
Polymer extrusion is an energy intensive process, which is often run at less than optimal conditions. The extrusion process consists of gradual melting of solid polymer by thermal conduction and viscous shearing between a rotating screw and a barrel; as such it is highly dependent upon the frictional, thermal and rheological properties of the polymer. Extruder screw geometry and extrusion variables should ideally be tailored to suit the properties of individual polymers, but in practice this is rarely achieved due to the lack of understanding of the process. Here, in-process monitoring techniques have been used to characterise the thermal dynamics of the extrusion process. Novel thermocouple grid sensors have been used to measure melt temperature fields within flowing polymer melts at the entrance to an extruder die in conjunction with infra-red thermometers and real-time quantification of energy consumption. A commercial grade of polyethylene has been examined using three extruder screw geometries at different extrusion operating conditions to understand the process efficiency. Extruder screw geometry, screw rotation speed and set temperature were found to have a significant effect on the thermal homogeneity of the melt and process energy consumed. (C) 2012 Elsevier Ltd. All rights reserved.
URI
http://hdl.handle.net/10454/9742
Version
No full-text in the repository
Citation
Vera-Sorroche J, Kelly AL, Brown E et al (2013) Thermal optimisation of polymer extrusion using in-process monitoring techniques. Applied Thermal Engineering. 53(2): 405-413.
Link to publisher’s version
Link to published version
Link to Version of Record
https://doi.org/10.1016/j.applthermaleng.2012.04.013
Type
Article
Qualification name
Notes