Fuzzy based design optimisation in microstrip lines for cross-talk
Ahmed, T. Hossain, M. Alamgir Ray, A.K. Ghassemlooy, Z.
Ahmed, T.
Hossain, M. Alamgir
Ray, A.K.
Ghassemlooy, Z.
Publication Date
2004
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
closedAccess
Accepted for publication
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
This paper presents an investigation of the design optimization in microstrip lines to reduce the crosstalk level using Fuzzy Logic. In microstrip lines length and spacing, termination conditions of interconnection and output impedance of gates are the major components that cause crosstalk. In order to design high speed printed circuit board (PCB) with optimum interconnection configuration, it is essential to reduce the crosstalk to its minimum tolerance level. A design methodology is proposed to correlate electrical parameters and physical configuration of lines to the crosstalk phenomena. This design is subsequently optimized using Fuzzy Logic to reduce the level of crosstalk. A set of experiments is carried out to demonstrate the capabilities of the design and optimization methods. The effect of the geometrical configuration of the lines on crosstalk, particularly the spacing, is highlighted.
Version
No full-text in the repository
Citation
Ahmed, T., Hossain, M.A., Ray, A.K. and Ghassemlooy, Z. (2004). Fuzzy based design optimisation in microstrip lines for cross-talk. Journal of Circuits Systems and Computers. Vol. 13, No. 1, pp. 121-136.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article