Highly improved PP/CNTs sheet prepared by tailoring crystallization morphology through solid-phase die drawing and multilayer hot compression
Lin, X. Gong, M. Coates, Philip D.
Lin, X.
Gong, M.
Coates, Philip D.
Publication Date
2020-08
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
Accepted for publication
2020-06-11
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
Simply melt blended polypropylene/carbon nanotubes composites (PP/CNTs) usually present mechanical deterioration. In this work, multilayered sheet of PP/CNTs with improved tensile property was obtained by solid-phase orientation and hot compression. The initially blended PP/CNTs were highly orientated by employing a constrained slit die and hot compressed under a certain temperature and pressure by stacking eight layers together. The effects of compression temperature and pressure on the tensile property and AC conductivity of the multilayered sheets were examined to explore the evolution of hierarchical crystallization morphology and CNT networks. The multilayered sheet which was hot compressed at 184°C and 5 MPa demonstrated an optimum tensile strength of ∼132.5 MPa and an elongation at break ∼52.7%, respectively, raised by almost 3-fold compared with those initially blended PP/CNTs. By increasing compression temperature and decreasing pressure, the AC conductivity showed an increase of 2 to 4 orders of magnitude.
Version
No full-text in the repository
Citation
Lin X, Spencer P, Gong M et al (2020) Highly improved PP/CNTs sheet prepared by tailoring crystallization morphology through solid-phase die drawing and multilayer hot compression. Polymer Crystallization. 3(4): e10137.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article