Behaviour of axially loaded concrete filled stainless steel elliptical stub columns
Lam, Dennis Gardner, L. Burdett, M.
Lam, Dennis
Gardner, L.
Burdett, M.
Publication Date
2010
End of Embargo
Supervisor
Rights
Peer-Reviewed
Yes
Open Access status
Accepted for publication
Institution
Department
Awarded
Embargo end date
Additional title
Abstract
This paper presents the details of an experimental investigation on the behaviour of axially loaded concrete-filled stainless steel elliptical hollow sections. The experimental investigation was conducted using normal and high strength concrete of 30 and 100 MPa. The current study is based on stub column tests and is therefore limited to cross-section capacity. Based on the equations proposed by the authors on concrete-filled stainless steel circular columns, a new set of equations for the stainless steel concrete-filled elliptical hollow sections were proposed. From the limited data currently available, the equation provides an accurate and consistent prediction of the axial capacity of the composite concrete-filled stainless steel elliptical hollow sections.
Version
No full-text in the repository
Citation
Lam D, Gardner L and Burdett M (2010) Behaviour of axially loaded concrete filled stainless steel elliptical stub columns. Advances in Structural Engineering. 13(3): 493-500.
Link to publisher’s version
Link to published version
Link to Version of Record
Type
Article